XL-27 3s Medical LED Curing Light for Orthodontics
Specification
LED Curing Light with industrial intelligent chip, digital display and multifunctions, safe operation and perfect self-protection system. It has pure blue visible light and the wavelength is 400-490nm. It can cure all the dental resin in the market nowadays.
| Input voltage | AC 100-240V, 50-60Hz |
| Battery | 3500mAh |
| Wavelength | 400nm-490nm |
| Light density | ≥2700mw/cm² |
| Setting time | 2-6S |
| Body material | Aluminum |
Display
Charge
1.Put the curing light into the charger socket, the yellow light is on.
2.When it is done, the green light is on. It takes about 4-6 hours.
3.Remove the adapter from the power supply after charging.
4.The battery can be replaced very easily.
Operation
1.Press the ON/OFF button, it is on.
2.Press the ON/OFF button over 3 seconds, it is off.
3.When it is on, you can set the TIME (from1-6 seconds), then press the ON/OFF button, it is working; press the ON/OFF button again, it stops.
4.It will turn off automatically without any operation in a few minutes.
5.If it buzzs 5 times, it must be charged before using.
