Chinese Professional Dentist Shop - XAU-JY 16L Mini Dental Steam Autoclave Sterilizer – Xrdent
| Rated voltage | AC 110V/50~60Hz/8A, AC 220V/50~60Hz/4A |
| Rated power | 1400VA (8A); 1200VA (4A) |
| Fuse | F12AL AC220V/F25AL AC110V |
| Operation temperature | 5~40ºC |
| The board affording weight | 4000N/m² |
| Noise | <50db |
| The maximum capacity of a plate | 1000g |
| The maximum duration of using loading test | 90mins |
| The maximum thermal radiation energy under the condition of 20ºC~26ºC | <2000J |
| Material | stainless steel 304 |
| Max. work pressure | 2.5 bar |
| Min. work pressure | -0.9 bar |
| Max. temperature | 145ºC |
| Chamber volume | 16L(Φ230×350mm) |
| Loading size | 180×180×280cm |
| Working pressure/temperature | 1.10~1.30bar/121ºC~122ºC; 2.10~2.30bar/134ºC~135ºC |
| Water volume for one cycle | 0.3L~0.4L |
Overview
![7T~8U[_H5J3XM`Y6}VS){]0](http://cdn.globalso.com/rvgshop/4e4f01041.png)
1-Power Switch
Tum on and off power
2-Door Handle
Push to close the door
3-Alarm Lamp
Tum Red to report error
4-Working Lamp
Green lamp on during cycle
5-Pressure Gauge
Show chamber pressure
6-Exhausting Valve
Control valve to exhaust Chamber air
7-Yellow Lamp
Yellow lamp on under 134℃, turns off under 121℃
8-Temperature Selector
Select sterilization under 121°C/120mins or 134°C/5mins
Packing
Tray rack 1 pcs
Tray 3 pcs
Removal tong 1 pcs
Draining tube 1 pcs
Power supply cable 1 pcs
Door gasket 1 pcs
Operation manual 1 pcs
Product detail pictures:
Related Product Guide:
Well-run equipment, professional sales team, and better after-sales services; We are also a unified big family, everyone stick to the company value "unification, dedication, tolerance" for Chinese Professional Dentist Shop - XAU-JY 16L Mini Dental Steam Autoclave Sterilizer – Xrdent, The product will supply to all over the world, such as: Guatemala, Greece, New York, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Sandy from Casablanca - 2018.09.19 18:37
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Marina from Hanover - 2017.03.28 12:22
